Precautions:

1. All acrylic glass adhesives will corrode the surface of the glass plate, leaving traces that are difficult to remove. Therefore, we can use self-adhesive methods to protect parts that do not require bonding.

2. Grease, dust or pores can hinder the uniform coating of the adhesive and leave air bubbles, so it must be removed before bonding. If the amount of binder is too low, binder will be introduced.

3. Due to the rapid evaporation of the adhesive, the edges of the bonded surface will turn white.

4. If the adhesive is not fully cured, different degrees of yellow will appear when exposed to direct sunlight for a long time, which will seriously affect the appearance of PMMA products.